Why Is My Whirlpool Washing Machine Pulsate So Much?

[MarvinVictor]

hey guys, I just lately note that my Whirlpool washing equipment has been pulsate a lot during the spin cycle. It's making a lot of sounds and even moving slightly. Does anyone know why this is happening and how I can fix it?

[GustavoRayden]

it sounds like your washing equipment might not be effectively leveled. If it's not on a flat surface, it can lead to excessive pulse. Try modifying the feet at the bottom of the machine to make sure it's stable and degree.

[QuincyRayden]

I had the same problem with my washer. In my case, I overloaded it with too many outfits, and it threw the balance off. Try redistributing the garments or washing fewer items at a time. Also, verify if any tiny items are stuck under the drum.

[BriarBobby]

another thing to check is whether the shipping bolts were removed. If the equipment is new, the shipping bolts may still be in area, which can result in it to pulse excessively. Look at the handbook to see how to take them out if that's the issue.

[MateoGavin]

it could also be an issue with the suspension rods or shock absorbers within the machine. If those are worn out, they may not be able to keep the drum steady during the spin cycle. You may need to get a technician to take a look.

[TadeoDiego]

thanks for the advice! I'll check out if it's leveled and see if I've been overloading it. If that doesn't fix it, I'll look into the suspension rods.